-Standard Gutters and 1 X Vent Included
-Approved by the TÜV Standards Authority.
-Corner Plates and Braces for Added Strength
-Single Sliding door – save space, will not blow in the wind
-Versatile door – position on either the left or right side
-Lever mechanism – hold the door in any position to control the air flow
-Roof vent – adjust the ventilation to suit your plants
-Roof braces – ensures strength of the structure
-7.5m² growing area – grow a variety of plants and produce
-10 Year Warranty (Frame and Base)
– Vitavia Greenhouse Base Included

FREE Delivery to MAINLAND UK. Surcharge Delivery Areas for Northern Scotland with Postcodes : PA PH DD AB IV KW
Delivery is not available to Northern Ireland, Isle of Man, Isle of Wight and Scottish Islands / Highlands
Delivery normally within 21 working days.

Vitavia Venus 6×12 Anodised Aluminium Greenhouse (complete with base)



Out of stock

Delivery Options

Please take a look at the delivery options for your area HERE

Vitavia Venus 6′ x 12′ Anodised Aluminium Greenhouse

(complete with greenhouse base)

The Vitavia 1.93m (6ft 4ins) wide Venus greenhouse is available in five sizes, so can meet the needs of both the beginner and the experienced gardener. There is a single sliding door which can be positioned to the left or the right and held in any desired position using the simple lever mechanism. The Vitavia Venus structure has been strengthened with the inclusion of roof braces.

The greenhouse is equipped with 1 or 2 roof vents (see diagram below), depending on size and the structure has been strengthened with the inclusion of roof braces, with additional side braces in the Venus 7500 (6′ x 12′ Models only). All Venus models have been approved by the TÜV Standards Authority.

The Venus is the ideal starter greenhouse, combining practicality with excellent value for money. The aluminium frame is of a good quality and is versatile enough to be adapted for extra ventilation, painted finishes etc.

The  greenhouse is relatively simple to construct using the comprehensive instructions which have excellent illustrations.

The complete Vitavia range is available in both Powder Coated Green or plain Anodised Aluminium* finish.

(*Anodisation is a process the aluminum goes through to keep it looking pristine throughout its life)

The Venus greenhouse is supplied complete with a base, this will give you a flat surface to construct the greenhouse on. This provides the greenhouse structure with ensured stability

Greenhouse base 

It is essential that every greenhouse is built on a firm and level base. Our package comes complete with the greenhouse base included as standard. Using a Vitavia base will add an extra 12.5cm (5”) to the height of the greenhouse.

Glazing options

Vitavia greenhouses are available with three glazing options :-

Horticultural Glass : the traditional glazing option

Toughened, safety glass : no sharp edges; ideal when young children are around

Twin – wall polycarbonate : retains heat, diffuses sunlight and reduces the risk of scorch. Safe and virtually unbreakable.

Ventilation Control

A fully adjustable roof vent is included, allowing you to alter the ventilation in the greenhouse to suit your needs. Plants prosper in different conditions, and this vent allows you to provide them with the optimal environment. For further control over ventilation, the door can be secured in any position, simply use the lever mechanism to secure it into place.

Roof Braces

Roof braces are included with the greenhouse for ensured sturdiness of the structure. The roof naturally takes a heavy load, but the braces give the roof some extra support.


It is recommended that at least two people take part in the assembly of this greenhouse. You will need screwdrivers and either a 10mm spanner or wrench. All relevant nuts, bolts, etc. are included. It is advised to pick a sunny spot, and if possible an area that is also sheltered from the wind



About Vitavia

Vitavia is the leading name in Europe for quality hobby greenhouses and greenhouse accessories.  Manufactured in the Vitavia greenhouse factory, the range has been developed by a team with over 35 years’ experience in the greenhouse market.

Based on traditional greenhouse styles, a coordinated design programme has ensured that Vitavia products now offer real benefits to both the dealer and the consumer.

All Vitavia greenhouse frames are constructed from anodised aluminium, ensuring clean handling and a pristine finish. Frames are available in natural silver or powder-coated green. Standard gutters and vents are also key features of the range. Supplied as kits, the frames simply bolt together using the fully illustrated Assembly Instructions.

A full range of accessories is also available to ensure maximum use of the greenhouse, including galvanised steel bases to provide an essential firm and level base, as well as an additional 12.5cm (5″) headroom in the greenhouse.

More and more gardeners are realising and appreciating the benefits of owning a greenhouse. Whatever the weather, a greenhouse can create its own micro climate. The growing season can start earlier and vegetables can be harvested for longer and, if you grow them organically, they will be free from harmful chemical residues.

Base Size (front x Side) - cm


Deliver Time (working Days)

EAN Code

Guarantee (years)

Main Door Opening Size (height x width) Wall Height (cm)

Overall Height Wall Height (cm)


Wall Height (cm)